Home Custom Hot Tub Covers |

Custom Hot Tub Covers

Custom Spa Cover Up To 8 Foot only $299 www.parkerspas.com

Contact: 303-431-0064 or email: parkerspas@yahoo.com

Specifications:

Marine Grade Vinyl
Energy Efficient Polystyrene Inserts
Inserts are Heat Sealed with Poly Vapor Moisture Barrier
4″ -2″ Tapered Foam Core Insulation
Galvanized Steel C Channel
Top Stitched
Steam Stoppers
Galvanized Channeling
Two Handles
Four Tie Downs with Keyed Lock Fasteners
5 Year Warranty Directly through Manufacturer
Standard Safety Features
16 Colors Available

SPA COVER

This cover not only helps preserve and protect your spa, but it will also reduce your monthly energy consumption. Four inches thick, with a five year warranty, this cover shields its spa from the elements outside maintaining the desired temperature and water quality inside. The covers are constructed using the highest quality materials. Manufactured using marine grade vinyl and energy efficient polystyrene inserts, this cover has a heat-sealed vapor moisture barrier to protect against water absorption.

How to Measure for a Cover:

It is best if you measure your existing cover and not your spa. In order to get the proper length and width, measure across the seam, then perpendicular to that. If your spa has cut out radius corners be sure to measure them as well. The final measurement required will be the skirt size. The skirt is the small flap that is sewn on to the bottom of the cover, the skirt would cover the acrylic lip that lies under the cover and above the spa cabinet.

If you do not have a cover to measure from then you must measure all the outside dimensions of the spa. The cover has a 2″ flap around the edges of the spa called a skirt. the skirt must easily sit over the edges of the spa, with a little room to spare.

It is always better to make the cover size a little bit bigger than your spa when measuring. If you make a mistake, and measure too small, the cover will not fit properly, will not sit flat and will not hold the heat in.

These covers come with four tie-downs with child-proof locks and locks that can either be attached to the wood spa cabinet or be screwed to a deck.

If your spa has curved corners then you will need to determine the radius:

Take a sheet of paper and trace around one of the curved corners of the cover. You will get a curved line. Remove the paper and complete the circle. You can do this freehand. Then measure across the middle of the circle you drew, and divide by 2.

Or, place a carpenter’s square on the outside of your spa. The distance between the corner of the carpenter’s square and the place where it touches the spa equals the radius of the curve

Parker Spas

4298 Kipling Street

Wheat Ridge, CO 80033

303-431-0064

www.parkerspas.com